Brand | B R |
Model Name/Number | X20BM11 |
Mounting Type | DIP |
Nominal Voltage | 24 VDC |
Permissible Contact Load | 10 A |
Pitch | 12.5+0.2 mm |
Degree Of Protection Per EN 60529 | IP20 |
Technical Data
Short description
Bus module | Bus module, 24 VDC keyed, internal I/O power supply connected through |
General information
Power consumption | |
Bus | 0.13 W |
Internal I/O | - |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc |
UL | cULus E115267 |
HazLoc | cCSAus 244665 |
DNV | Temperature: B(0 - 55°C) |
LR | ENV1 |
KR | Yes |
ABS | Yes |
BV | EC33B |
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport |
|
Part Number | 5142 |
Brand | B R |
Model Name/Number | X20BB80 |
Current | 24 VDC |
Mounting Type | DIP |
Package Type | Box |
Degree of Protection Per EN 60529 | IP20 |
Permissible Contact Load | 10 A |
Bus module | Bus base - Backplane for bus controller fieldbus interface and bus controller power supply module |
Power consumption | |
Bus | 0.25 W |
Internal I/O | - |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
UL | cULus E115267 Industrial control equipment |
HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
DNV | Temperature: B(0 - 55°C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck) |
LR | ENV1 |
KR | Yes |
ABS | Yes |
BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
EAC | Yes |
KC | Yes |
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Note | Left and right X20 end cover plates included in delivery |
Pitch | 37.5+0.2mm |
Brand | Siemens |
Current | 0.5 A |
Manufacturer Series | ET200SP |
I/O Points | Profinet |
Output Type | Digital |
Communication Port | DI 16X24 VDC |
Model Name/Number | 6ES7131 - 6BH00-0BA0 |
Frequency | 50 Hz |
Product | |||
Article Number (Market Facing Number) | 6ES7131-6BH00-0BA0 | ||
Product Description | *** Spare part *** SIMATIC ET 200SP, digital input module, DI 16X 24 V DC Standard, suitable for BU type A0, color code CC00, module diagnostics | ||
Product family | Not available | ||
Product Lifecycle (PLM) | PM500:Discontinued Product or end of PLM & Support | ||
PLM Effective Date | End of product lifecycle since: 01.10.2021 | ||
Notes | Product is no longer available. Successor: 6ES7131-6BH01-0BA0 | ||
Successor information | |||
Successor | 6ES7131-6BH01-0BA0 | ||
Successor Description | SIMATIC ET 200SP, Digital input module, DI 16x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 Piece, fits to BU-type A0, Colour Code CC00, input delay time 0,05..20ms, diagnostics wire break, diagnostics supply voltage | ||
Price data | |||
Region Specific PriceGroup / Headquarter Price Group | S20 / 2ET | ||
List Price | Show prices | ||
Customer Price | Show prices | ||
Surcharge for Raw Materials | None | ||
Metal Factor | None | ||
Delivery information | |||
Export Control Regulations | ECCN : N / AL : N | ||
Standard lead time ex-works | 1 Day/Days | ||
Net Weight (kg) | 0,037 Kg | ||
Packaging Dimension | 6,50 x 7,80 x 2,30 | ||
Package size unit of measure | CM | ||
Quantity Unit | 0 Piece | ||
Packaging Quantity | 1 | ||
Additional Product Information | |||
EAN | 4025515080763 | ||
UPC | 887621167226 | ||
Commodity Code | 85389091 | ||
LKZ_FDB/ CatalogID | ST9-E5 | ||
Product Group | 4B12 | ||
Group Code | R151 | ||
Country of origin | Germany | ||
Compliance with the substance restrictions according to RoHS directive | Since: 31.01.2012 | ||
Product class | A: Standard product which is a stock item could be returned within the returns guidelines/period. | ||
WEEE (2012/19/EU) Take-Back Obligation | No | ||
REACH Art. 33 Duty to inform according to the current list of candidates |
|
*Your information is safe with us.
Brand | Siemens |
Usage/Application | Industrial |
Network Type | 4G |
Model Name/Number | 6ES71316BH010BA0 |
EAN | 4047623408550 |
UPC | 804766529009 |
Commodity Code | 85389091 |
Product | ||||||||||||||||||||||||||||||||||
Article Number (Market Facing Number) | 6ES7131-6BH01-0BA0 | |||||||||||||||||||||||||||||||||
Product Description | SIMATIC ET 200SP, Digital input module, DI 16x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 Piece, fits to BU-type A0, Colour Code CC00, input delay time 0,05..20ms, diagnostics wire break, diagnostics supply voltage | |||||||||||||||||||||||||||||||||
Product family | Digital input modules | |||||||||||||||||||||||||||||||||
Product Lifecycle (PLM) | PM300:Active Product | |||||||||||||||||||||||||||||||||
Price data | ||||||||||||||||||||||||||||||||||
Region Specific PriceGroup / Headquarter Price Group | 255 / 255 | |||||||||||||||||||||||||||||||||
List Price | Show prices | |||||||||||||||||||||||||||||||||
Customer Price | Show prices | |||||||||||||||||||||||||||||||||
Surcharge for Raw Materials | None | |||||||||||||||||||||||||||||||||
Metal Factor | None | |||||||||||||||||||||||||||||||||
Delivery information | ||||||||||||||||||||||||||||||||||
Export Control Regulations | AL : N / ECCN : N | |||||||||||||||||||||||||||||||||
Standard lead time ex-works | 90 Day/Days | |||||||||||||||||||||||||||||||||
Net Weight (kg) | 0,036 Kg | |||||||||||||||||||||||||||||||||
Packaging Dimension | 6,90 x 7,50 x 2,40 | |||||||||||||||||||||||||||||||||
Package size unit of measure | CM | |||||||||||||||||||||||||||||||||
Quantity Unit | 1 Piece | |||||||||||||||||||||||||||||||||
Packaging Quantity | 1 | |||||||||||||||||||||||||||||||||
Additional Product Information | ||||||||||||||||||||||||||||||||||
EAN | 4047623408550 | |||||||||||||||||||||||||||||||||
UPC | 804766529009 | |||||||||||||||||||||||||||||||||
Commodity Code | 85389091 | |||||||||||||||||||||||||||||||||
LKZ_FDB/ CatalogID | ST76 | |||||||||||||||||||||||||||||||||
Product Group | 4520 | |||||||||||||||||||||||||||||||||
Group Code | R151 | |||||||||||||||||||||||||||||||||
Country of origin | Germany | |||||||||||||||||||||||||||||||||
Compliance with the substance restrictions according to RoHS directive | Since: 15.09.2017 | |||||||||||||||||||||||||||||||||
Product class | A: Standard product which is a stock item could be returned within the returns guidelines/period. | |||||||||||||||||||||||||||||||||
WEEE (2012/19/EU) Take-Back Obligation | Yes | |||||||||||||||||||||||||||||||||
REACH Art. 33 Duty to inform according to the current list of candidates |
| |||||||||||||||||||||||||||||||||
Classifications | ||||||||||||||||||||||||||||||||||
|
Brand | Siemens |
Model Name/Number | 6ES7135 - 6HD00-0BA1 |
Manufacturer Series | Simatic S7 |
Current | 24 VDC |
Mounting Type | DIP |
Output Type | Analog |
Package Type | Box |
Usage/Application | Industrial |
Number of Inputs | 24 Digits |
|
Brand | B R |
Model Name/Number | X20BT9100 |
Mounting Type | DIP |
Package Type | Box |
Input Voltage | 24 VDC |
Fuse | Required Line Fuse |
Permissible Contact Load | 10 A |
Pitch | 12.5+0.2mm |
Bus transmitter | X2X Link bus transmitter with supply for I/O |
B&R ID code | 0x1BC2 |
Status indicators | X2X bus function, operating state, module status |
Diagnostics | |
Module run/error | Yes, using LED status indicator and software |
X2X bus function | Yes, using LED status indicator |
Power consumption | |
Bus | 0.5 W |
Internal I/O | |
As bus transmitter | 0.1 W |
Additionally as supply module | 0.6 W |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
UL | cULus E115267 Industrial control equipment |
HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
EAC | Yes |
KC | Yes |
Reverse polarity protection | No |
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Note | Order 1x terminal block X20TB06 or X20TB12 separately. Order 1x bus module X20BM11 or X20BM15 separately. |
The bus transmitter is used for seamless expansion of the X20 system. Stations can be up to 100 m apart.
The bus transmitter module is only permitted to be operated with a bus module where the internal I/O power supply is connected through (e.g. X20BM11).
If the supply is used for the internal I/O power supply, this potential group is not permitted to be supplied by any other module. An I/O module with bus module X20BM01 must be used to isolate the potential group.
*Your information is safe with us.
Brand | B R |
Model Name/Number | X20BR9300 |
Mounting Type | DIP |
Package Type | Box |
Input Voltage | 24 VDC |
Parallel Connection | Yes |
Redundant Operation | Yes |
Fuse | Integrated, Cannot Be Replaced |
Internal I/O | 0.6 W |
Input Current | Max. 0.7 A |
Nominal Output Power | 7 W |
Power Consumption for X2X Link Power Supply | 1.62 W |
Overload Characteristics | Short-circuit Proof, Temporary Overload |
Reverse Polarity Protection | Yes |
The bus receiver is used to connect the X20 System to the X2X Link. The module is equipped with a feed for the X2X Link as well as the internal I/O supply.
Short description
Bus receiver | X2X Link bus receiver with supply for I/O and bus |
General information
B&R ID code | 0x1BC1 |
Status indicators | X2X bus function, overload, operating state, module status |
Diagnostics | |
Module run/error | Yes, using LED status indicator and software |
Overload | Yes, using LED status indicator and software |
X2X bus function | Yes, using LED status indicator |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc |
UL | cULus E115267 |
HazLoc | cCSAus 244665 |
EAC | Yes |
KC | Yes |
Input I/O power supply
Input voltage | 24 VDC -15% / +20% |
Fuse | Required line fuse: Max. 10 A, slow-blow |
Reverse polarity protection | No |
Brand | B R |
Model Name/Number | X20PS9400 |
Mounting Type | DIP |
Package Type | Box |
Input Voltage | 24 VDC |
Redundant Operation | Yes |
Overload Characteristics | Short-circuit Proof, Temporary Overload |
Nominal Output Power | 7 W |
Internal I/O | 0.6 W |
Power Consumption for X2X Link Power Supply | 1.42 W |
Input Current | Max. 0.7 A |
Reverse Polarity Protection | Yes |
Interfaces | 1x RS232 Service Interface |
Parallel Connection | Yes |
Power supply module | 24 VDC supply module for bus controller, X2X Link power supply and I/OGeneral information |
B&R ID code | 0x1F8C |
Status indicators | Overload, operating status, module status, RS232 |
Diagnostics | |
Module run/error | Yes, using LED status indicator and software |
RS232 data transfer | Yes, using LED status indicator |
Overload | Yes, using LED status indicator and software |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
UL | cULus E115267 Industrial control equipment |
HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
DNV | Temperature: B(0 - 55°C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck) |
LR | ENV1 |
KR | Yes |
ABS | Yes |
BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
EAC | Yes |
KC | Yes |
Input voltage | 24 VDC -15% / +20% |
Fuse | Required line fuse: Max. 10 A, slow-blow |
Reverse polarity protection | No |
Nominal output voltage | 24 VDC |
Behavior on short circuit | Required line fuse |
Permissible contact load | 10 A |
Service interface | |
Signal | RS232 |
Variant | Connection made using 12-pin terminal block X20TB12 |
Max. transfer rate | 115.2 kbit/s |
Electrical isolation | BC/X2X Link supply isolated from BC/X2X Link power supply I/O supply not isolated from I/O power supply, and RS232 not isolated from bus |
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | See section "Derating". |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Brand | B R |
Model Name/Number | X20PS3300 |
Mounting Type | DIP |
Package Type | Box |
Behavior on short circuit | Required Line Fuse |
Permissible Contact Load | 10 A |
B&R ID code | 0x1BC0 |
Power Consumption For X2X Link Power Supply | 1.42 W |
Nominal Output Voltage | 24 VDC |
Status Indicators | Overload, Operating State, Module Status |
Internal I/O | 0.6 W |
Nominal Output Power | 7 W |
Short description
General information
Diagnostics | |
Module run/error | Yes, using LED status indicator and software |
Overload | Yes, using LED status indicator and software |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc |
UL | cULus E115267 |
HazLoc | cCSAus 244665 |
DNV | Temperature: B(0 - 55°C) |
LR | ENV1 |
KR | Yes |
ABS | Yes |
BV | EC33B |
EAC | Yes |
KC | Yes |
X2X Link power supply input
Input voltage | 24 VDC -15% / +20% |
Input current | Max. 0.7 A |
Fuse | Integrated, cannot be replaced |
Reverse polarity protection | Yes |
X2X Link power supply output
Parallel connection | Yes |
Redundant operation | Yes |
Overload characteristics | Short-circuit proof, temporary overload |
*Your information is safe with us.
Brand | B R |
Model Name/Number | X20DO9322 |
Mounting Type | DIP |
Package Type | Box |
Connection Type | 1 Wire Connections |
Total Output Current | 6 A |
Output Circuit | Source |
Variant | Current Sourcing FET |
Nominal Voltage | 24 VDC |
Nominal Output Current | 0.5 A |
Technical Data
Short description
I/O module | 12 digital outputs 24 VDC for 1-wire connections |
General information
B&R ID code | 0x1B9A |
Status indicators | I/O function per channel, operating state, module status |
Diagnostics | |
Module run/error | Yes, using LED status indicator and software |
Outputs | Yes, using LED status indicator and software (output error status) |
Power consumption | |
Bus | 0.26 W |
Internal I/O | 1.15 W |
Additional power dissipation caused by actuators (resistive) [W] | +0.63 |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc |
UL | cULus E115267 |
HazLoc | cCSAus 244665 |
DNV | Temperature: B(0 - 55°C) |
LR | ENV1 |
KR | Yes |
ABS | Yes |
BV | EC33B |
Power | 2 HP |
Usage | for Industrial Machinery |
Brand | Siemens |
Model Name/Number | 6EP4347-7RB00-0AX0 |
Input Voltage | 230 V |
Input Phase | 1 - Phase |
Input Frequency | 50 Hz |
Output Current | 40 A |
Weight | 0.500 Kg |
Package Dimensions | 185 x 190 x 80 mm |
|
Mounting Type | Panel Mount |
Manufacturer Series | Simatic S7 |
Output Type | Analog |
Brand | Siemens |
Usage/Application | PLC |
UPC | 662643231328 |
EAN | 4025515072379 |
Net Weight (kg) | 390 gm |
Model No. | 6ES7138-4CA01-0AA0 |
Packaging Dimension | 6.20 x 9.30 x 2.40 Inch |
|
*Your information is safe with us.
Mounting Type | Panel Mount |
Brand | Siemens |
Manufacturer Series | Simatic S7 |
Output Type | Analog |
Usage/Application | PLC |
Commodity Code | 85389091 |
Model No. | 6ES7134 4JB01 0AB0 |
Packaging Dimension | 6.30 x 9.20 x 2.30 Inch |
Net Weight (kg) | 450 gm |
EAN | 4025515076551 |
Product | ||||
Article Number (Market Facing Number) | 6ES7134-4JB01-0AB0 | |||
Product Description | *** Spare part *** SIMATIC DP, Electronics module for ET 200S, 2 AI TC standard; 15 mm width, 15 bit+sign +/-80 mV; Characteristic linearization for thermocouples of the types: B, E, J, K, L, N, R, S, T Cycle time 65 ms/channel with SF LED (group fault) | |||
Product family | Not available | |||
Product Lifecycle (PLM) | PM410:Product cancellation | |||
PLM Effective Date | Product is cancelled since: 01.10.2019 | |||
Notes | This product is a Spare Part, please visit the Spares & Service section for more informationIf you need assistance please contact our local Siemens office | |||
Price data | ||||
Region Specific PriceGroup / Headquarter Price Group | S20 / 2ET | |||
List Price | Show prices | |||
Customer Price | Show prices | |||
Surcharge for Raw Materials | None | |||
Metal Factor | None | |||
Delivery information | ||||
Export Control Regulations | ECCN : N / AL : N | |||
Standard lead time ex-works | 1 Day/Days | |||
Package size unit of measure | CM | |||
Quantity Unit | 1 Piece | |||
Packaging Quantity | 1 | |||
Additional Product Information | ||||
LKZ_FDB/ CatalogID | ST9-E5 | |||
Product Group | 4469 | |||
Group Code | R151 | |||
Country of origin | China | |||
Compliance with the substance restrictions according to RoHS directive | Since: 25.11.2009 | |||
Product class | A: Standard product which is a stock item could be returned within the returns guidelines/period. | |||
WEEE (2012/19/EU) Take-Back Obligation | Yes | |||
REACH Art. 33 Duty to inform according to the current list of candidates |
|
Mounting Type | Rack Mount |
Brand | Siemens |
Manufacturer Series | Simatic S7 |
Output Type | Analog |
Usage/Application | PLC |
Number of Inputs | 14 Digits |
Model Number | 6ES7132 6BH01 2BA0 |
Product | ||||||||||||||||||||||||||||||||||
Article Number (Market Facing Number) | 6ES7132-6BH01-2BA0 | |||||||||||||||||||||||||||||||||
Product Description | SIMATIC ET 200SP, Digital output module, DQ 16x 24V DC/0.5A STANDARD, Source output (PNP,P-switching) Packing unit: 10 pieces, fits to BU-type A0, Colour Code CC00, substitute value output, module diagnostics for: short-circuit to L+ and ground, wire break, supply voltage | |||||||||||||||||||||||||||||||||
Product family | Digital output modules | |||||||||||||||||||||||||||||||||
Product Lifecycle (PLM) | PM300:Active Product | |||||||||||||||||||||||||||||||||
Price data | ||||||||||||||||||||||||||||||||||
Region Specific PriceGroup / Headquarter Price Group | 255 / 255 | |||||||||||||||||||||||||||||||||
List Price | Show prices | |||||||||||||||||||||||||||||||||
Customer Price | Show prices | |||||||||||||||||||||||||||||||||
Metal Factor | None | |||||||||||||||||||||||||||||||||
Delivery information | ||||||||||||||||||||||||||||||||||
Export Control Regulations | AL : N / ECCN : EAR99H | |||||||||||||||||||||||||||||||||
Standard lead time ex-works | 90 Day/Days | |||||||||||||||||||||||||||||||||
Net Weight (kg) | 0,030 Kg | |||||||||||||||||||||||||||||||||
Packaging Dimension | 8,30 x 14,90 x 0,70 | |||||||||||||||||||||||||||||||||
Package size unit of measure | CM | |||||||||||||||||||||||||||||||||
Quantity Unit | 1 Piece | |||||||||||||||||||||||||||||||||
Packaging Quantity | 1 | |||||||||||||||||||||||||||||||||
Minimum order quantity | 10 | |||||||||||||||||||||||||||||||||
Additional Product Information | ||||||||||||||||||||||||||||||||||
EAN | 4047623408581 | |||||||||||||||||||||||||||||||||
UPC | 804766529054 | |||||||||||||||||||||||||||||||||
Commodity Code | 85389091 | |||||||||||||||||||||||||||||||||
LKZ_FDB/ CatalogID | ST76 | |||||||||||||||||||||||||||||||||
Product Group | 4520 | |||||||||||||||||||||||||||||||||
Group Code | R151 | |||||||||||||||||||||||||||||||||
Country of origin | Germany | |||||||||||||||||||||||||||||||||
Compliance with the substance restrictions according to RoHS directive | Since: 15.09.2017 | |||||||||||||||||||||||||||||||||
Product class | A: Standard product which is a stock item could be returned within the returns guidelines/period. | |||||||||||||||||||||||||||||||||
WEEE (2012/19/EU) Take-Back Obligation | - | |||||||||||||||||||||||||||||||||
REACH Art. 33 Duty to inform according to the current list of candidates |
| |||||||||||||||||||||||||||||||||
Classifications | ||||||||||||||||||||||||||||||||||
|
Brand | B R |
Model Name/Number | X20BM01 |
Mounting Type | DIP |
Package Type | Box |
Nominal Voltage | 24 VDC |
Degree Of Protection Per EN 60529 | IP20 |
Permissible Contact Load | 10 A |
Bus module | Power supply bus module, 24 VDC keyed, internal I/O power supply interrupted to the left |
Power consumption | |
Bus | 0.13 W |
Internal I/O | - |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
UL | cULus E115267 Industrial control equipment |
HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
DNV | Temperature: B(0 - 55°C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck) |
LR | ENV1 |
KR | Yes |
ABS | Yes |
BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
EAC | Yes |
KC | Yes |
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
*Your information is safe with us.
Mounting Type | Panel Mount |
Manufacturer Series | Simatic S7 |
Output Type | Analog |
Brand | Siemens |
Usage/Application | PLC |
Number of Inputs | 9 Digits |
Commodity Code | 85389091 |
Net Weight | 440 gm |
EAN | 4025515058502 |
UPC | 662643230857 |
Model No. | 6ES7134 4JB00 0AB0 |
Product | ||
Article Number (Market Facing Number) | 6ES7134-4JB00-0AB0 | |
Product Description | ***Spare part*** SIMATIC DP, Electronics module for ET 200S, 2 AI TC; 15 mm width, 15 bit+sign +/-80 mV; Characteristic linearization for thermocouples of the types: B, E, J, K, L, N, R, S, T Cycle time 65 ms/channel with SF LED (group fault) | |
Product family | Not available | |
Product Lifecycle (PLM) | PM500:Discontinued Product or end of PLM & Support | |
PLM Effective Date | End of product lifecycle since: 16.09.2020 | |
Notes | Product is no longer available. Successor: 6ES7134-4JB01-0AB0 | |
Price data | ||
Region Specific PriceGroup / Headquarter Price Group | 2ET / 2ET | |
List Price | Show prices | |
Customer Price | Show prices | |
Surcharge for Raw Materials | None | |
Metal Factor | None | |
Delivery information | ||
Export Control Regulations | ECCN : N / AL : N | |
Standard lead time ex-works | 1 Day/Days | |
Net Weight (kg) | 0,044 Kg | |
Packaging Dimension | 6,30 x 9,20 x 2,20 | |
Package size unit of measure | CM | |
Quantity Unit | 0 Piece | |
Packaging Quantity | 1 | |
Additional Product Information | ||
LKZ_FDB/ CatalogID | ST9-E5 | |
Product Group | 4467 | |
Group Code | R111 | |
Country of origin | Germany | |
Compliance with the substance restrictions according to RoHS directive | Since: 31.12.2008 | |
Product class | D: products made to order / customer's specifications, requiring engineering services, which cannot be re-used or utilized (design to customer) | |
WEEE (2012/19/EU) Take-Back Obligation | No | |
REACH Art. 33 Duty to inform according to the current list of candidates |
|
Mounting Type | Panel Mount |
Brand | Siemens |
Manufacturer Series | Simatic ET 200SP |
I/O Points | 32 |
Output Type | Analog |
Usage/Application | PLC |
Number of Inputs | 14 Digits |
Model No. | 6ES7155 6AA01 0BN0 |
|
Brand | Siemens |
Warranty | 1 Year |
Network Type | 4G |
Output Type | Analog |
Model Name/Number | 6ES7134 6HB00 0CA1 |
Usage/Application | PLC |
Number of Inputs | 16 Digits |
|
*Your information is safe with us.
*Your information is safe with us.
*Your information is safe with us.
*Your information is safe with us.
*Your information is safe with us.
*Your information is safe with us.